Free Shipping in the US!

Express Worldwide Shipping

30-Day Returns* *Conditions apply

Steelcase Leap V2 Arm Pads Replacement Tutorial

By the OfficeLogixShop teamUpdated 2 min read

Steelcase Leap V2 Arm Pads Replacement Tutorial - Office Logix Shop

How to Replace the Steelcase Leap V2 Arm Pads?

Welcome, Steelcase Leap enthusiasts, to another practical guide brought to you by OfficeLogixShop. Today, we're focusing on a simple yet impactful upgrade to your workspace comfort: replacing the arm pads on your Steelcase Leap V2 chair.

Tools Needed:

Steps to Replace the Arm Pads:

1. Removing the Old Arm Pads:

  • Begin by using your screwdriver to remove all screws attached to the old arm pad. Take care to keep these screws as you'll need them to secure the new arm pad.

2. Positioning the New Arm Pad:

  • Take your new arm pad and place it on the armrest as shown in our tutorial. Ensure it's aligned correctly to avoid any discomfort or misalignment.

3. Securing the Arm Pad:

  • Start by tightening the screws into the new arm pad, but only go halfway. This allows for a bit of maneuverability if you need to adjust the positioning slightly.

4. Final Tightening:

  • Once the arm pad is correctly positioned, compress the pad by pushing down on it as demonstrated, then tighten all the screws fully to secure it in place.

Frequently Asked Questions

What tools are necessary to complete the arm pad replacement on the Steelcase Leap V2 chair?

To successfully complete this upgrade, you will need a screwdriver and a set of new arm pads from OfficeLogixShop. Remember to keep the original screws after removing the old pads, as you will need them to secure the new ones.

How do you correctly position and begin securing the new arm pads to the armrests?

Take your new arm pad and place it on the armrest, making sure it is aligned correctly to avoid any discomfort or misalignment. When securing it, start by tightening the screws into the new arm pad only halfway, which allows for a bit of maneuverability if you need to adjust the positioning slightly.

What is the final step to ensure the arm pads are completely secure and ready for use?

Once the arm pad is correctly positioned and the screws are halfway in, compress the pad by pushing down on it. While maintaining this downward pressure, fully tighten all the screws to securely lock the arm pad in place.

Conclusion:

And just like that, you've successfully replaced the arm pads on your Steelcase Leap V2 chair, enhancing not only the comfort but also the longevity of your trusted office companion. We hope you found this guide easy to follow. If you encounter any issues with your office chair or have requests for future tutorials, don't hesitate to let us know. Your feedback helps us create content that makes your office life a breeze.

Shop the chairs in this article

See all Leap V2 tutorials

The OfficeLogixShop team

We have refurbished thousands of office chairs since 2015 at our Lewis Center shop near Columbus, Ohio, and we film these tutorials from that work. About OfficeLogixShop

Keep reading