How To Connect and Activate the Cable-Activated Cylinder on The Herman Miller Aeron Chair
Received your Herman Miller Aeron chair in two pieces? No problem! This tutorial will guide you through connecting and activating the cable-activated cylinder effortlessly. Whether it's your first setup or you're reassembling your chair, these instructions will ensure a smooth process.
Tools Needed:
- None! Just your hands and the provided components.
Steps to Connect and Activate:
Identify Your Cylinder Type:
- Determine if you have a top-button activated cylinder or a cable-activated cylinder with clips. This tutorial focuses on the latter.
Connecting the Cylinder:
- Thread the cable through the designated hole in the mechanism.
- Press the plastic clip in until you hear a click, indicating it's securely fastened.
Testing the Connection:
- Use the external lever to shorten the cable, which in turn activates the cylinder, allowing you to adjust the chair's height.
Installing the Cylinder on the Chair:
- Insert the cylinder into the base of the chair, ensuring it fits into the bottom of the mechanism.
Removing the Mechanism Cover:
- With the mechanism cover removed, you'll have access to connect the cable properly.
- Insert the edge of the cable into the first clip, followed by the plastic notch into the second clip to secure it.
Final Testing:
- Use the height adjustment lever to ensure the chair moves up and down smoothly. If it does, the installation was successful.
Reassembling the Chair:
- Replace the mechanism cover, and your chair is ready to use. Cable-activated cylinders are plug-and-play, requiring no calibration.
Conclusion:
Connecting and activating the cable-activated cylinder in your Herman Miller Aeron chair is a straightforward process. Following these steps will have your chair ready for use in no time, ensuring you can enjoy its full range of ergonomic benefits.