How To Replace the Back on the Herman Miller Aeron Remastered Chair?
Welcome to this quick and informative Tutorial by OfficeLogixShop, where we focus on providing our community with exclusive tutorials and in-depth reviews from within the industry. Today, we're guiding you through the process of replacing the back on the Herman Miller Aeron Remastered chair.
Tools Needed:
- Allen Wrench or Drill
- Pliers (if necessary)
Steps to Replace the Back:
Identify the Type of Back:
- The Aeron Remastered comes with two back types: PostureFit and Lumbar. The PostureFit back is identifiable by holes at the bottom, whereas the Lumbar back lacks these holes.
Understand Compatibility:
- It's important to note that upgrading from a Lumbar to a PostureFit back directly isn't possible, unless you got a custom PostureFit SL kit from OfficeLogixShop, then you can do it. For a standard PostureFit setup, you need the back specifically designed for it, marked by the presence of holes.
Removing the Old Back:
- Start by unscrewing the four bolts that secure the back to the chair frame. An Allen wrench or a drill can be used for this step, depending on what you have available.
Installing the New Back:
- Position your new back, aligning it with the frame. Reinsert and tighten the screws to secure it in place. If you encounter any issues with the drill bit getting stuck, pliers can be used for removal.
Frequently Asked Questions
How do you identify the different back types on the Herman Miller Aeron Remastered, and is it possible to upgrade directly from one to another?
The PostureFit version is identifiable by holes at the bottom, whereas the Lumbar version lacks these holes. It is important to note that upgrading directly from a Lumbar to a PostureFit setup is not possible, unless you got a custom PostureFit SL kit from OfficeLogixShop, then you can do it. For a standard setup, you need the component specifically designed for it, marked by the presence of holes.
What tools are required to remove the old component on the Aeron Remastered, and how do you install the new one?
Start by using an Allen wrench or a drill, depending on what you have available, to unscrew the four bolts that secure the back to the chair frame. To install the new part, position it by aligning it with the frame, then reinsert and tighten the screws to secure it securely in place. If you encounter any issues with the drill bit getting stuck, pliers can be used for removal as highlighted in the tutorial.
Perfect Back:
Replacing the back on your Herman Miller Aeron Remastered chair is a straightforward process with the right tools and knowledge. Whether you're maintaining your chair or looking to upgrade, following these steps will ensure a successful replacement.