Free Shipping in the US!

Express Worldwide Shipping

30 Days Money Back Guarantee

Cyber Monday Deals - LAST CHANCE!

Get chairs up to 70% off MSRP! Plus, 15% off all parts and headrests! More Savings at Checkout!

Herman Miller Embody Unboxing and Installation Guide - OfficeLogixShop

Herman Miller Embody Unboxing and Installation Guide - OfficeLogixShop - Office Logix Shop

Welcome to our comprehensive tutorial on unboxing and setting up your Herman Miller Embody chair. Whether you’re enhancing your workspace or setting up a brand-new chair, this guide will walk you through the entire process, from unboxing to troubleshooting common assembly issues.

What’s Inside the Box?

Upon opening the box, you’ll find:

Chair Parts:

  • Spine
  • Back
  • BackFit Adjustment Knob

Assembly Tools:

  • Two Allen wrenches (long and short)
  • Back bolts
  • Metal rod (for spine assembly)
  • Two plastic hinges
  • Screws for fastening

Everything required for assembly is included. There’s no need to source additional tools.

Tools You’ll Use:

  • T27 torque Allen wrench (provided)
  • T40 torque Allen wrench (provided)

Step-by-Step Assembly Instructions

1. Assembling the Back and Spine

  1. Position the spine under the antler and dome of the backrest.
  2. Take the metal rod and carefully align it with the hole in the spine.
  3. Push the rod through the spine until it fully extends to the other side.

2. Securing the Hinge Covers

  1. Identify the two plastic hinge covers, noting they are left- and right-specific.
  2. Align the rod inside both hinge covers and push them firmly into place.
  3. Ensure the hinge covers snap securely around the rod.

3. Locking the Spine Assembly

  1. Insert bolts into the holes on the left and right sides of the hinge covers.
  2. Use the T27 torque Allen wrench to tighten the bolts securely. Apply downward pressure while tightening to ensure a snug fit.

4. Attaching the Back to the Base

  1. Align the two holes at the bottom of the backrest with the protrusions on the chair base.
  2. Push the back firmly into place, ensuring a proper fit.

5. Securing the Back to the Base

  1. From the back side of the chair, insert the short bolts and use the T40 torque Allen wrench to tighten them securely.
  2. Insert the long bolts into their designated spots and tighten them securely.

Pro Tip: If the long bolts don’t catch the thread, the nut may be slightly misaligned. It’s a normal issue for Embody chairs. Lay the chair on the ground to stabilize the thread and nut. Push the back firmly into place to ensure alignment, then proceed to tighten the bolts. This does not mean your chair is damaged or defective, and no return is necessary. Follow this step for a proper assembly.

6. Attaching the BackFit Adjustment Knob

  1. Align the BackFit adjustment knob with its slot on the back of the chair.
  2. Push it into place securely.
  3. Twist the knob to adjust the lumbar support to your preferred position.

Troubleshooting Common Issues

Loose Height Adjustment Cable

If the height adjustment function isn’t working or the cable feels loose:

  • Hook the cable into the cylinder by pushing it in as demonstrated. This will re-engage the mechanism.

Misaligned Bolts

  • If bolts don’t thread easily, ensure the chair is laid on a flat surface. Stabilize the parts and try again, as described in the Pro Tip in Step 5.

Final Adjustments and Testing

After completing assembly:

  • Test all chair functions, including height adjustment, lumbar support, and recline.
  • Ensure all bolts are tightened securely to avoid any instability.

Bonus Tips:

  • Check out our detailed Embody Chair Adjustment Guide to fine-tune the chair for your perfect ergonomic fit.
  • Consider adding an Embody headrest to complete your setup. It’s available in various colors and fully ergonomic for enhanced comfort.

Your Embody Chair is Ready!

Congratulations! By following this guide, you’ve successfully assembled your Herman Miller Embody chair. You’ve made an excellent investment in your comfort and productivity, and your workspace is now equipped with one of the most advanced ergonomic chairs on the market. Enjoy your new Embody experience!