How To Fix Loose Aeron Chair Arms in Less Than Two Minutes?
Herman Miller Aeron chairs are renowned for their durability and ergonomic design. However, many users have encountered an issue with the flip arms becoming loose over time. While the initial thought might be to replace the arm Yokes and swing arms at a considerable expense, OfficeLogixShop offers a quick, effective, and economical solution. Here’s how you can fix your Aeron chair’s loose arms for less than a dollar and in under two minutes.
Tools Needed:
- E-Clips (3/8 inch recommended, but size may vary based on arm looseness)
- Flat Head Screwdriver
Steps to Fix Loose Arms:
Remove the Chair’s Back:
Start by locating the four screws at the back of the chair.
- Use a screwdriver to remove these screws, then set the chair’s back aside.
Select the Correct Size E-Clip:
- Determine the appropriate E-Clip size for your chair’s arm looseness. If the arm is excessively loose, start with a 3/8 inch clip. If this size makes the arm too tight, switch to a 1/4 inch E-Clip, and vice versa.
Unlock the Flip Knob and Adjust the Swing Arm:
- Unlock the flip knob on the arm and push the swing arm towards the arm yoke. You can use your body to apply pressure, or have someone assist you. This step eases the E-Clip installation.
Install the E-Clip:
- While still applying pressure to the swing arm, use a flat head screwdriver to create a gap in the arm yoke.
- Insert the E-Clip into this gap to secure the arm. Depending on the looseness, you may need to install multiple E-Clips to eliminate wobble.
Final Thoughts:
If followed correctly, these steps will result in a securely fixed arm, eliminating any wobbliness. This method not only saves you money but also time.