Shipping World Wide - Free Shipping in USA
Heavy Duty Replacement Gas Cylinder Fit High Most High End Ergonomic & Executive Chair- Including Herman Miller Aeron
Heavy Duty Replacement Gas Cylinder Fit High Most High End Ergonomic & Executive Chair- Including Herman Miller Aeron
$23.99

$89.00

Heavy Duty Replacement Gas Cylinder Fit High Most High End Ergonomic & Executive Chair- Including Herman Miller Aeron

      OfficeLogixShop Gas Cylinder Fit Herman Miller Aeron Chairs

  • Standard cylinder diameter: Outer cylinder: 2 inches, inner cylinder: 1.1 inches. 
  • Designed to be heavy duty: holds up to 450 lbs On most office, 
  • Executive and computer chairs.5’’ stroke for adjusting chair Height: minimum length: 10.5 inches; Maximum length when fully extended: 15.5 inches; adjustable range: 5 inches 
  • Smooth & noiseless movement: full 360 degree rotation, smooth and noiseless movements to all directions
  • Easy installation & money-back : can be installed easily with no additional screws required. If you are not satisfied with our chair gas cylinder, just return it within 30 days for a full refund.

    Special Installation for Herman Miller Aeron Chair: 


1- Take off the Old Cylinder (There are punch of Helpful videos on youtube)

2- After Installing the New Cylinder, You may see the chair go down when you set on it. 
             to Avoid this go to the following Steps: 
             - open the mechanism top cover.
             - loose the bolt a little bit the which push the cylinder button in order to work perfectly.

Customer Reviews

Based on 2 reviews
50%
(1)
50%
(1)
0%
(0)
0%
(0)
0%
(0)
N
N.K.
Not an Exact Replacement, Probably Good Enough

First off this part is 1/2 to 1/3 the cost of the closest replacement cylinder I could find. I decided I would give it a try and see how things went. Many people report these cheaper cylinders will not raise to the same high range as the original piston because they do not sit low enough in the base. While this cylinder does not sit as low as the original it raises to the exact same height. It does not fit quite as snugly so there may be some wobble over time. It also does not lower quite as far as original, but that should only be an issue for the shortest of stature chair users. One must adjust the allen key that controls the chair lift button to make everything work perfectly.

Overall, great replacement as long as you don't need to use the chair in the fully down position.

S
Sherwood Campbell

Heavy Duty Replacement Gas Cylinder Fit High Most High End Ergonomic & Executive Chair- Including Herman Miller Aeron

Customer Reviews View on Amazon Write a Review
 

  out of 5 stars

You Must purchase this Product before to post a Review.
5 star
 
4 star
 
3 star
 
2 star
 
1 star
 

Customer Reviews

Based on 2 reviews
50%
(1)
50%
(1)
0%
(0)
0%
(0)
0%
(0)
N
N.K.
Not an Exact Replacement, Probably Good Enough

First off this part is 1/2 to 1/3 the cost of the closest replacement cylinder I could find. I decided I would give it a try and see how things went. Many people report these cheaper cylinders will not raise to the same high range as the original piston because they do not sit low enough in the base. While this cylinder does not sit as low as the original it raises to the exact same height. It does not fit quite as snugly so there may be some wobble over time. It also does not lower quite as far as original, but that should only be an issue for the shortest of stature chair users. One must adjust the allen key that controls the chair lift button to make everything work perfectly.

Overall, great replacement as long as you don't need to use the chair in the fully down position.

S
Sherwood Campbell

Heavy Duty Replacement Gas Cylinder Fit High Most High End Ergonomic & Executive Chair- Including Herman Miller Aeron